Grounding bar are also used as the lightning rods for the tall buildings. Well, in case of a storm, there will be rain and lighting is a high possibility. Because of this, it is necessary that the building have them installed. The rods will be able to arrest the power surge and not break at any time. Once they arrest the power will be driven to the ground where it will be neutralized. Keep reading to know more about the grounding rod and how they are used.
In case of a storm, all tall buildings are at high risk of being hit by a lightning strike. In case this happens, then if the house is not electrocuted, someone around may be hit. This calls for the arresters to be installed. This protects the house and also the occupants in the house. Well, with this fact, then it is a requirement that the houses are fitted with the rod.
Talking of the rods, you may want to know more about them. Then if this is the case, continue reading. The bar will come in different shapes and also sizes. There will be some that are sharp and other blunt. The point should be that the rod should be able to conduct the electricity into the ground in the safest way possible.
With this fact, then you need to know how it actually works, well, in the first place, there is the metal rod, the wire and the grounding bar absorber. When the rod is struck, the power is conducted through the wire down to the grounding bar that absorbs the electricity. The earth drives the power into the ground causing no damages.
Always make sure that you conduct a follow-up. What is a flow up in case of a lightning strike? Well, if you have a rod installed, there is always the option of doing an after the survey of the impact. The strike can damage the building in several ways. In this case, if you suspect that there has been a strike. Make sure that you make a point and access the damage.
There are also buildings that are very sophisticated and any given strike can cause immense damage to the structures. Well, in such case, you will find that there will be several rods on the roof. They will be placed all over the roof. Also, they will use connectors to connect them to one single conductor. In the case of a strike, then the power will be taken up by the bar and driven into the ground in the fastest way possible.
The usage of these rods will date back into the early 18th century. All this came from the discovery made by Franklin. He discovered the electricity and the rods themselves. He used them to harvest the energy from the strike. This made them common over the while.
Finally, the usage of these rods is common even now. Some use them for decorative purposes or just as a precaution in their houses.
In case of a storm, all tall buildings are at high risk of being hit by a lightning strike. In case this happens, then if the house is not electrocuted, someone around may be hit. This calls for the arresters to be installed. This protects the house and also the occupants in the house. Well, with this fact, then it is a requirement that the houses are fitted with the rod.
Talking of the rods, you may want to know more about them. Then if this is the case, continue reading. The bar will come in different shapes and also sizes. There will be some that are sharp and other blunt. The point should be that the rod should be able to conduct the electricity into the ground in the safest way possible.
With this fact, then you need to know how it actually works, well, in the first place, there is the metal rod, the wire and the grounding bar absorber. When the rod is struck, the power is conducted through the wire down to the grounding bar that absorbs the electricity. The earth drives the power into the ground causing no damages.
Always make sure that you conduct a follow-up. What is a flow up in case of a lightning strike? Well, if you have a rod installed, there is always the option of doing an after the survey of the impact. The strike can damage the building in several ways. In this case, if you suspect that there has been a strike. Make sure that you make a point and access the damage.
There are also buildings that are very sophisticated and any given strike can cause immense damage to the structures. Well, in such case, you will find that there will be several rods on the roof. They will be placed all over the roof. Also, they will use connectors to connect them to one single conductor. In the case of a strike, then the power will be taken up by the bar and driven into the ground in the fastest way possible.
The usage of these rods will date back into the early 18th century. All this came from the discovery made by Franklin. He discovered the electricity and the rods themselves. He used them to harvest the energy from the strike. This made them common over the while.
Finally, the usage of these rods is common even now. Some use them for decorative purposes or just as a precaution in their houses.
About the Author:
When you are looking for information about a grounding rod, come to our web pages online today. More details are available at http://www.rossengineeringcorp.com now.
No comments:
Post a Comment